Fortune global 500 Dow Chemical developed screw air compresor innovated lubricant.
UconTM Air Compressor Lubricant S-6 is based on the PAG oil of Dow Chemical with other lubricants advantages to develop reliable
and compatible aynthetic oil.
Ac S-6 lubricant is free of macro-molecule during running.Then carbon deposit coking will be decreased.
Restrain coking and carbon deposit
Dow Chemical S6 compressor synthetic lubricant
is special fluid, it can effectively restrain and removve precipitate
to protect the machine well. Then it will avoid coking and
carbon deposit during running.
Longer service life
The air release property of S6 synthetic
lubricant is less than one minute, which will
decrease the contact time & area with air. Then
it will improve the machine heat and lubrication
efficiency to avoid hhigh temperature oxidation
Lower maintance cost
- Prolong lubricant service life
- Restrain lubricant temperature increase
- Decrease cooling loading & air consumption
- Air end screw
- Decrease screw film enery consumption
- Air oil separator
- Decrease separator block & high pressure drop
|Test item||Test method||S-6|
|Viscosity at 40°C||ASTM D445||45.82|
|Viscosity at 100°C||ASTM D445||7.64|
|Viscosity index||ASTM D2270||133|
|Pour point °C||ASTM D97||-35|
|Flash Point (COC), °C||ASTM D92||245|
|Water Separation Properties||ASTM D1401||10|
|Acid number , mg KOH/g||ASTM D664||0.13|
|Bubble properties 93.5°C||ASTM D892||5/0|
|Density g/ml, 25°C||ASTM D941||0.856|