|

 2

Share:


DMG Screw Kompressoren

Contact Us


Quantity:


Stabdards for configuration

Permanent magnet frequency conversion, energy saving selection
The perfect combination of inverter and inverter motor
DMG full series air compressor can be equipped with frequency converter to achieve optimal energy saving effect

  • Adjust energy consumption by 20% rhrough frequency converter
  • Achieve constant pressure air, provide stable air source for users
  • The balance starts, reduces the impact of the motor on the power grid, and extend the mechanical life of the motor and the unit
  • The frequency converter can be provided at random and can be upgraded later





 

Permanent magnet synchronous motor scheme

DMG full series air compressor can be equipped with permanent magnet synchronous motor further improve 
the energy saving effect

  • Adoptrefractory rare erth permanent magnet and never demagnetize
  • Motor efficiency is 5% - 8% higher than ordinary motor, and more energy saving
  • Can realize frequency conversion configuration function, and the frequency adjustment range is wide








 

High efficiency and energy saving dual - stage screw host

The double-stage screw compressor has the reasonable pressure ratio, ultra-small leakage and ultra-low noise.Make the
Compressed rotor and rotor of the secondary compression combinationwithin a chassis,and through the direct drive for the front,
make every level of the rotor at runtime and matching the best linear velocity of gas production,and reasonable and can reduce
leakage in the compression, compression ratio under the same flow, two-stage compression than single stage compression energy
saving 15% on average.








 
Model Motor power 
KW
Exhaust pressure
Mpa
Volume flow
m³ / min
Air Outlet KG Dimensions
(L x W x H)
DMG-7.5FPM 7.5 0.8 1.2 G1/2 240 870 x 720 x 920
DMG-11FPM 11 0.8 1.5 G3/4 450 1080 x 750 x 1000
DMG-15FPM 15 0.8 2.4 G3/4 450 1080 x 750 x 1000
DMG-22FPM 22 0.8 3.5 G1 620 1040 x 880 x 1250
DMG-30FPM 30 0.8 5.0 G1 620 1040 x 880 x 1250
DMG-37FPM 37 0.8 6.2 G1-1/2'' 850 1250 x 1000 x 1400
DMG-45FPM 45 0.8 8.0 G1-1/2'' 850 1250 x 1000 x 1400
DMG-55FPM 55 0.8 10.0 G1-1/2'' 1000 1500 x 1125 x 1480
DMG-75FPM 75 0.8 13.0 G2'' 1150 1700 x 1200 x1600
DMG-90FPM 90 0.8 16.0 DN65 1560 1900 x 1300 x 1900
DMG-110FPM 110 0.8 20.0 DN65 1560 2250 x 1500 x 1900
DMG-132FPM 132 0.8 24.0 DN65 1760 2250 x 1500 x 1900
 
Reference conditions : temperature : 20°c suction pressure : 1 bar (abs) relative humidity : 0%
Standard constraints : height : 1000 m standard equipment : highest temperature 40°c standard options : 
The Company's products continue to improve, to retain right of design change.Parameters change, without prior notice.

 Inquiry - DMG Screw Kompressoren